Isolation and Test Plugs

Francis Torque Service LLC will provide Standard Bore Isolation and Test Plugs designed to provide an isolation barrier on localized field repairs and modifications. These plugs are designed to isolate, monitor and vent hydrocarbon vapors to a safe area.

Increase Safety

Isolation plugs allow the user to isolate, monitor, and vent hydrocarbon vapors to a safe area when performing welded connections or making repairs in hot-work areas.

Isolate and Test

Isolate and test with the same tool. After welding is completed, the annular of the tool is positioned between the welded connections and filled with preferred media to perform a hydrostatic test.

Weld Test

The Double Block and Bleed design allows water to be pumped between seals then perform a high- pressure test on the single weld without testing the entire line.

Large Diameter Capability

Size range: 2”- 42”

Choose from a large inventory of plugs, depending on your specific requirements. We partner with several local and regional providers to assure the most extensive inventory of equipment available.

Multi Schedule

All plugs 4” and larger are multi-schedule. Reducing necessary inventory and overall cost.

Standard Test Plug

Standard Test Plug

Gripper Size Range: 3/4″ – 16″

Gripper Size Range: 3/4″ – 16″

Isolation and Test Plugs Send Inquiry

Isolation and Test Plugs Overview

Isolate the Line

Withstand Full Upstream Pressure

Withstand Full Upstream Pressure

Test the Weld

Test the Weld